Shanghai Orinet Electronic & Technical Co.,Ltd
|
Payment Terms: | T/T |
Place of Origin: | Shanghai, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
General Purpose Filters | |||
1EGG1-1 | 3EGG1-1 | 6EGG1-1 | 10EGG1-1 |
1EGG1-2 | 3EGG1-2 | 6EGG1-2 | 10EGG1-2 |
1EGG8-1 | 3EGG8-1 | 6EGG8-1 | 10EGG8-1 |
1EGG8-2 | 3EGG8-2 | 6EGG8-2 | 10EGG8-2 |
1EGS1-1 | 3EGS1-1 | 6EGS1-1 | 10EGS1-1 |
1EGS1-2 | 3EGS1-2 | 6EGS1-2 | 10EGS1-2 |
Ground Circuit Inductor | |||
1EGG1C-1 | 3EGG1C-1 | 6EGG1C-1 | |
1EGG1C-2 | 3EGG1C-2 | 6EGG1C-2 | |
1EGG8C-1 | 3EGG8C-1 | 6EGG8C-1 | |
1EGG8C-2 | 3EGG8C-2 | 6EGG8C-2 | |
Medical Filters | |||
1EHG1-2 | 3EHG1-2 | 6EHG1-2 | 10EHG1-2 |
1EHG8-2 | 3EHG8-2 | 6EHG8-2 | 10EHG8-2 |
1EHGS1-2 | 3EHGS1-2 | 6EHGS1-2 | 10EHGS1-2 |
Maximum leakagecurrent, each Line to Ground: | |||
HG Models | GG Models | ||
@ 120 VAC 60 Hz | 2 µA | .25 mA | |
@ 250 VAC 50 Hz | 5 µA | .42 mA | |
Hipot rating (oneminute): | |||
Line to Ground | 2250 VDC | ||
Line to Line | 1450 VDC | ||
Operating Frequency: | 50 / 60 Hz | ||
Rated voltage(max.): | 250 VAC | ||
Rated Current: | 1 to 10 Amps | ||
Required Fuse(s): | 5 x 20 mm (not included) |
Typical Dimensions: | ||
Mounting holes (2): | .132 [3.35] Dia. with .236 [5.99] Dia. x 90° countersink for #4 flathead screw | |
Line Inlet (1): | IEC60320-1 C14 | |
Load Terminals (2): | .250 [6.3] with .07[1.8] Dia. hole | |
Ground Terminal (1): | .250 [6.3] with .07 x .16 [1.8 x 3.8] slot |
Typical Dimensions: | ||
Line Inlet (1): | IEC60320-1 C14 | |
Load Terminals (2): | .250 [6.3] with .07[1.8] Dia. hole | |
Ground Terminal (1): | .250 [6.3] with .07 x .16 [1.8 x 3.8] slot |
Typical Dimensions: | ||
Mounting holes (2): | .132 [3.35] Dia. with .236 [5.99] Dia. x 90° countersink for #4 flathead screw | |
Line Inlet (1): | IEC60320-1 C14 | |
Wire Leads: | 5.0 [127.0] Min. 18AWG, UL1015 |
Typical Dimensions: | ||
GS / HGS panel thickness: | 0.032 – 0.080 [0.81 – 2.03] | |
Corner radius: | 0.138 [0.35] |
Part No. | A | B | C | D | E |
(max.) | (max.) | (max.) | ±.015 | (max.) | |
± .38 | |||||
GG1 & HG1 | 2.15 | 1.13 | 1.29 | 1.417 | 1.76 |
54.5 | 28.7 | 32.8 | 36.0 | 44.7 | |
GG1C | 2.45 | 1.13 | 1.28 | 1.417 | 1.76 |
62.23 | 28.7 | 32.5 | 36.0 | 44.7 | |
GS1 & HGS1 | 2.13 | 1.13 | 1.28 | 1.46* | 1.42 |
54.0 | 28.7 | 32.5 | 37.08* | 36.1 | |
GG8 & HG8 | 2.02 | 1.13 | 1.29 | 1.417 | 1.76 |
51.1 | 28.7 | 32.8 | 36.0 | 44.7 | |
* max. dimension |