AYA Series

• For 3-phase, four wire, WYEapplications
• Cost-effective, universal 3-phase filters
• Good attenuation over the complete frequency range of 10kHz to 30MHz
• Two different mounting styles available

Ordering Information

Available Part Numbers

Flange Mount	Bulkhead Mount
16AYA6A	16AYA6
16AYA10	25AYA6
25AYA6A	36AYA6
36AYA6A	50AYA6
36AYA10
50AYA6A
63AYA6A
63AYA10
100AYA6A

Specifications

Maximum leakage current, each Line to Ground:
	@ 120 VAC 60 Hz	1.62mA
	@ 250 VAC 50 Hz	2.82mA
Hipot rating (one minute):
	Line to Ground	1500 VAC
	Line to Line	1450 VDC
Operating Frequency:		50 / 60 Hz
Rated voltage (max.):
	Phase to Phase	440 VAC
	Phase to Ground	250 VAC
Rated Current:		16A to 50A
Operating Ambient Temperature Range (at rated current Ir):
		-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir √(85-Ta)/45

Case Styles
AYA6A (Flange mount with screw terminals)

Typical Dimensions:
	Mounting Slots (4):	..425 x .254 [10.8 x 6.6]
	16 & 25A Terminals (8):	8-32 Torque 26 lbf-in. [2.94 N-m] max.
	36A Terminals (8):	10-32 Torque 27 lbf-in. [3.05 N-m] max.
	50, 63 & 100A Terminals (8):	1/4-20 Torque 56 lbf-in. [6.33 N-m] max.

Typical Dimensions:
	Mounting Slots (4):	..425 x .254 [10.8 x 6.6]
	Terminal blocks (8):	10mm²  Torque 15.93 lbf-in. [1.8 N-m] max.
	Ground terminal (1):	M5 Torque 26.58 lbf-in. [3.0 N-m] max.

63AYA10

Typical Dimensions:
	Mounting Slots (4):	..425 x .254 [10.8 x 6.6]
	Terminal blocks (8):	16mm²  Torque 20.35 lbf-in. [2.3 N-m] max.
	Ground terminal (1):	M6 Torque 53.1 lbf-in. [6.0 N-m] max.

Case Dimensions
Part No.ABCDE*(max.)(max.)(max.)(max.)(max.)16AYA6 / A
25AYA6 / A7.914.371.975.945.51201.0111.050.0151.0140.0

---

36AYA6 / A
50AYA6 / A7.914.372.565.945.51201.0111.065.0151.0140.0

---

63AYA6 / A
100AYA6A7.914.372.565.945.51201.0111.050.0151.0140.0

---

16AYA106.974.371.975.945.51177.0111.050.0151.0140.0

---

36AYA107.884.372.565.945.51200.0111.065.0151.0140.0

---

63AYA1010.985.082.528.436.26279.0129.064.0214.0159.0

---

* Does not apply to bulkhead models

Minimum Insertion Loss in dB:Measured in closed 50 ohm system   Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line)

---

---

Current Rating	Frequency - MHz
	.01	.05	.1	.5	1	5	10	30
16A	2	11	19	52	53	70	61	30
25A	2	12	19	46	49	64	54	27
36A	1	10	18	49	54	63	57	32
50A	1	8	14	43	47	63	53	29
63A	2	10	22	50	60	75	70	55
100A	1	15	22	55	60	65	55	50

Current Rating	Frequency - MHz
	.01	.05	.1	.5	1	5	10	30
16A	14	31	30	82	87	76	77	47
25A	20	36	38	85	81	68	69	33
36A	20	39	36	86	78	65	62	35
50A	20	30	38	85	82	67	66	38
63A	30	40	45	90	85	70	70	60
100A	20	35	45	80	80	65	60	55